Drape Long Spit Shield (model 1800L)

Drape Long Spit Shield (model 1800L)

Drape Long Spit Shield (model 1800L) Product Image

Onyx Medical Inc.'s Drape Long Spit Shield, model 18000L, has been designed to protect law enforcement and health care workers from the unwanted transfer of spit, sputum or blood splash. The shield is easy to place over the head, and once in place, the shield is difficult to dislodge. The shield becomes a barrier without creating a claustrophobic environment.  Someone wearing the shield retains their field of vision and can breathe easily. There is not a sense of confinement or restriction that can increase unnecessary reactions.

The Drape Long has an 8 inch fluid barrier that extends below the full face shield and hangs to mid chest. The fluid barrier fabric can be tucked inside a shirt, or tee shirt, or left to hang outside over clothing. Hook and loop fasteners attached to the bottom of the barrier fabric hold the fluid fabric in place against the inside of any clothing. Even with no clothing to tuck the fabric into, the fabric hangs down low enough to prevent projectile spitting reaching to law enforcement personnel. 

The shield is nonthreatening to the wearer. Air circulates around the fabric to allow easy breathing and helps maintain a calming effect. The clear plastic shield allows law enforcement personnel to directly observe the condition of the wearer at any time. Even if someone in restraint tilts their head back and attempts to spit under the shield, the Spit Shield will prevent the delivery of fluids. The safety of law and health personnel is simply and effectively protected with the use of the Drape Spit shield.

The Drape Spit Shield is not classified as an impact shield, but is classified as a personal protection item under OSHA standards as a splash shield. The laminated fluid barrier fabric does not allow contaminated bodily fluids to penetrate across to the other side of the fabric.  Spit or splash is stopped and protection is provided.

Spit shields are also an effective means of personal protection for law enforcement and health personnel against blood of bodily fluid exposure in an accident or other medical emergency setting. Wearing this shield will protect you while working without compromising your ability to work. You have crystal clear vision through a patent pending plastic shield minimizes glare and distortion. The shield is anti-fog coated. Keep the Drape Long spit shield handy for your personal protection.

The Spit shield is Latex Free, comfortable, well made and provides excellent personal protection. Face-It shields are CE marked and manufactured under ISO conditions for the highest quality and OSHA level protection. The plastic shield dimensions are 9 inches high by 13 inches wide with the barrier fabric adding protection over an 8 x 11.5 inch are below the shield. 

The Spit shield is individually packaged in a plastic bag. There are 2 boxes of 50 shields in each case of 100 shields. The Spit shield is available for $170.00 per case which is $1.70 per shield.

Expand for more details on this Product

Sanosil Hospital-Grade Disinfectant

Product From Stop Rubbernecking CC LLC

Sanosil, an odorless, colorless and tasteless formula, is a Hydrogen Peroxide based product that has been proven to kill almost every major bacteria, virus and fungus typically found in facilities with unprecedented success. Sanosil is an EPA registered hospital grade disinfectant that leaves no potentially harmful residue behind and is extremely cost-effective, setting a new standard for disinfectants. Not only is Sanosil suggested for a large variety of uses, the product itself is easy to use resulting in improved occupational safety.

Get Info Now

Integrated Flotation/Armored Vest System

Product From Mustang Survival, a part of The Safariland Group

This integrated flotation/armored vest system continues to support maritime tactical operations by combining the Mustang Survival MD3196 Compact Tactical Life Preserver for law enforcement with the PROTECH APV Tactical Armored Vest to provide flotation safety to the operator in the event of a man overboard situation. The low profile design of the life preserver allows for a full range of operational movement and allows for a modified firing position when inflated.

Get Info Now

Heat Stress Prevention Vests

Product From Steele Vest

Hot weather is coming, are you ready?   Prevent heat stress and WORK COOLER, SAFER AND LONGER with Steele Body Cooling Vests.  Steele has 30 years of experience combating heat stress plus independent testing documenting the effectiveness of our Steele Body Cooling Vests.   

Get Info Now

NBC System

Product From Ready to Go Survival

The NBC System that Ready to Go Survival offers has a SGE 150 Gas Mask with a NATO Gas Filter. These types of masks will be able to provide much better safety, in the event of an airborne toxin, compared to your typical N95 hospital type mask.

Get Info Now

Suicide Prevention Safety Smock


 The Original Safety Smock 
Adjustable to a wide range of sizes. Durable and safe. 

• Adult - Fits 5’0” to 6’6” Length: 44-50” Chest girth: 47-59” 

• Teen - Fits most 12-18 yr olds Length 39-43” Chest girth: 30-50” 

Get Info Now

TAC 6 Explosive Protection Suit

Product From Med-Eng, a part of The Safariland Group

The Med-Eng brand announced that its new multi-mission TAC 6 suit and visor ensemble for tactical officers at the 2014 SHOT Show. This high-mobility protective equipment addresses the increasing threats posed by explosive devices during operations.  Frontline personnel including

Get Info Now

Decon Stability Cane

Product From DQE INC.

Wearing a bulky HazMat suit during responder decontamination makes it difficult to maneuver, leading to slips and falls. After watching emergency responders resort to using walkers, traffic cones and other objects not designed for their specific needs during decontamination, DQE has developed the Decon Stability Cane. Now responders can move with ease, grasping the security of the Decon Stability Cane.

Get Info Now

HERO 14mil Gloves for Our Heroes

Product From Adenna Inc.

As a salute to the hard-working men and women of law enforcement, Adenna has named a glove after you – HERO. These gloves are a 14 mil thick, 12 inch long cuff, powder free latex exam glove designed to provide the highest level of protection for high-risk and heavy-duty applications. The glove fingers are almost 4 times thicker than regular gloves. It is suitable for law enforcement, correctional facilities, homeland security and border control personnel.

Get Info Now

Deluxe Supplied Air Shield/Helmet System for


Allegro Industries' Deluxe Supplied Air Shield/Helmet System for one or two workers provides all-in-one head, eye, face respirator protection against hazardous airborn contaminates and flying debris. The Low Pressure Economy Supplied Air Shield System is available in a low pressure or high pressure model and is perfect for use with grinding, chipping, spray painting and auto body repair. The visor is made of Nylon plastic, the lens is polycarbonate and the chin guard is polypropylene for added strength, while the shroud is cotton for comfort. The Full Mask Supplied Air Respirator, available as a low-pressure or high pressure system, is made of silicone rubber for durability and will hold its shape even in extreme heat and cold. Allegro’s family of disposable hoods offers a loose-fitting alternative to masks and are especially comfortable for bearded workers. The company's fully disposable hoods are designed with the down-tube integrated into the hood, so there’s no need for decontamination. Popular in dirty environments such as spray painting or asbestos abatement, various coatings and designs protect workers against a broad range of chemicals, and large, clear windows provide an expansive view. The Deluxe Tyvek Double Bib Hard Hat and the Tyvek Supplied Air Respirator Hood offer a reinforced down tube with swivel connection for added flexibility. All Allegro respirators incorporate a unique over-the-shoulder design to keep the air hose out of the way of work. Use the above hoods with a Low Pressure Flow Adaptor and/or with a High Pressure Controller. Other low-pressure NIOSH-approved supplied air respirators include the full-mask and half-mask styles, which are soft and pliable and offer continuous flow protection.

Get Info Now

NIOSH_Approved Respirators Supplied Air Systems


Offering a complete line of NIOSH-approved respirator masks, hoods, helmets, air-source equipment, and accessories, Allegro Industries has pioneered the concept of supplied air systems. Purchase items separately, or using just one part number, order a complete system. Low-pressure systems are manufactured with a continuous-flow supplied-air mask, hood, helmet, or Air Shield in addition to a supplied air source and 50 or 100 feet of breathing air hose. These systems are good for one to three workers. Low- and high-pressure systems are available with a variety of useful accessories, including flow test kits, CO monitors, and airline cascade kits.

Get Info Now