PROTECH IMPAC-HT Biceps (Upper Arm) Plate Set

PROTECH IMPAC-HT Biceps (Upper Arm) Plate Set

PROTECH IMPAC-HT Biceps (Upper Arm) Plate Set Product Image

Safariland added PROTECH IMPAC-HT Biceps (Upper Arm) Plate Set to its line of IMPAC special threat plates. The lightweight 7-inch by 8 inch plates come in a set of two and feature an increased curvature that conforms to the shape of the upper arm to provide added protection from handgun threats and trauma. These plates are compatible with the PROTECH Tactical upper arm (biceps) protector soft armor accessory, sliding easily into the special threat plate pocket and are made to be used in conjunction with the soft armor panels included in the accessory. The lightweight design and curvature of the IMPAC-HT Biceps Plate Set provide additional handgun threat and trauma protection to the upper arms without interfering with the officer’s mobility.

The IMPAC-HT Biceps Plate Set has been independently tested* to defeat the following rounds:

Ballistic Rounds

Impacts Per Plate

Test Velocity (fps)

(Rounds tested on separate plates)

Speer .357 Sig, 125 gr. FMJ


1470 ± 30 fps

Speer .44 Mag, 240 gr. SJHP


1430 ± 30 fps

Win. 9 mm +P+, 127 gr. SXT


1250 ± 30 fps

Speer .357 Sig, 125 gr. GDHP


1375 ± 30 fps

Norinco 7.62 x 25 mm Tokarev, 85 gr. FMJ


1530 ± 30 fps

FN 5.7 x 28 mm, 28 gr. SS195LF (Belgium)


 2086 ± 30 fps (avg.)

FN 5.7 x 28 mm, 40 gr. SS197 (Blue Tip)


 1721 ± 30 fps (avg.)

*The IMPAC-HT Biceps Plate Set has not been tested or certified in accordance with NIJ 2005 Interim Requirements or NIJ Standard-0101.06. The IMPAC-HT Biceps Plate Set should always be used in conjunction with flexible soft armor panels.

The PROTECH line of IMPAC special threat plates is now available in five styles:

  • IMPAC-HT for high velocity handgun threat protection 
  • IMPAC-CT for spike and edged blade threat protection 
  • IMPAC-MT for handgun, spike and edged blade threat protection 
  • IMPAC-RT for rifle threat protection
  • IMPAC-RT PLUS for enhanced rifle threat protection

For more information on PROTECH’s IMPAC plates or carrier offerings visit


Expand for more details on this Product

Fast Release Tactical Shield

Product From Elite Sterling Security
  • Fast Release Tactical Shield
  • Special fully ballistic shield that deploys in seconds to offer superior protection.
  • Lightweight design and ergonomic handle, very versatile with the ability to quickly use in any situation.
Get Info Now

S.O.B. Classroom Barrier

Product From Daw Technologies Ballistic Products

The S.O.B.Classroom Barrier from Daw Tech (patents pending) can best be described as a ballistic rated barrier-of-entry. Specifically tailored for schools,the Classroom Barrier is designed to fortify classroom door openings instantly, making each classroom a safe room. Once deployed the teacher and students are shielded against any visual or physical contact from outside the classroom, thus allowing law enforcement the necessary time to react to any threat. The barrier is comprised of an N.l.J.Level lllA ballistic panel (withstands multiple handgun & shotgun blasts) nestled in a steel frame. To barricade the door, the Classroom Barrier is simply slid across the opening.The Classroom Barrier automatically locks when slid into position. Various configurations are available to suit each condition.The Classroom barrier can be incorporated into new construction or retrofit existing schools.

Get Info Now

ARMOR WALL Mobile Ballistic Barrier System

Product From Patriot3 Inc.

Patriot3's ARMOR WALL transportable perimeter wall system provides ballistic protection and complete versatility. Each section can be assembled in heights of 40-, 60- and 80 inches, assembled in minutes and disassembled for use elsewhere. They can stand alone or connect with other sections for different needs, including 360-degree protection. Available in NIJ Threat Levels III and IV. ARMOR WALL 3 weighs 160 pounds and the ARMOR WALL 4 weighs 290 pounds. Each section stores in its own rolling transport case. 

Get Info Now


Product From Point Blank Enterprises Inc.

Offered under our PARACLETE brand, the SPEED Plate provides undercover agents, who depend on readily available and adaptable protection, with the ultimate in lightweight armor protection against “exotic” rounds. Designed to be worn in the chest pocket of concealable vests, this multi-curve SPEED plate is ultra-thin and highly effective in helping to minimize blunt force trauma against a variety of rounds. Undercover agents typically wear their soft body armor when on duty, but they may have to respond to an active shooter situation that might involve rounds their armor isn't rated to stop. PARACLETE’s hard armor SPEED Plates easily fit inside the pocket of an officer’s carrier to offer protection against a variety of special threat rounds.

Get Info Now

TSI Type IIIA Shields

Product From PROTECH Tactical, a part of The Safariland Group

PROTECH Tactical expaned its line of ballistic shields with the introduction of the TSI family of type IIIA shields. These new shields are available in three sizes, 20” x 34”, 24” x 36” and 20” x 48”, and feature a flat design with a low-profile, ambidextrous collapsible handle for easy storage. The TSI shields feature a 4” x 10” multi-layered polycarbonate ballistic viewport with a 100% aramid ballistic shield design and durable 1000-denier Cordura nylon outer skin. The combination of these materials makes the TSI family of shields extremely lightweight and affordable.

Get Info Now

Feminino concealable vest

Product From Elite Sterling Security

Elite Sterling Security's Feminino women's concealable vest was specifically designed to fit the contours of the female physique. It is lightweight, flexible and comfortable for long-term wear.  Using Miguel Caballero's proprietary ballistic materials, this vest boasts an anti-microbial finish and odor resistant carrier fabric, with special attention given to breathability. The closures help ensure a wide range of adjustments and a snug fit to prevent movement. 

Get Info Now

Uvex Turboshield

Product From Honeywell Safety Products

Today,Honeywell Safety Products launched Uvex Turboshield, a revolutionary new face protection system whose unique, patented and patent-pending features are based on rigorous customer research. The Uvex Turboshield face protection system delivers superior comfort for longer wear, the easiest visor exchange available, improved protection and optimal balance when worn with a hard hat. The face protection system includes headgear, a hard hat adaptor and replacement visors all sold separately for maximum versatility. The Uvex Turboshield platform is the perfect solution for workers in nearly every industry who are exposed to falling or flying objects, impact, splash and airborne debris. The unique, Uvex Turboshield toric-shaped visor provides excellent optics, increased field of view and 50% more chin coverage than traditional cylindrical visors, without the need for bulky accessories. Replacement visors are available in Clear, Gray, UV/IR Shade 3.0 and UV/IR Shade 5.0. The renowned, Uvex dual anti-scratch/anti-fog lens coating is optional on the Clear and Gray visors for extended life and reduced fogging. The Uvex Turboshield system is certified to the requirements of ANSI Z87.1-2010 and CSA Z94.3 standards.   

Get Info Now

Bullet-Resistant Whiteboard

Product From Hardwire Armor Systems LLC


  • 18 inches x 20 inches in size.
  • Weighs less than four pounds.
  • Blends well with classroom – no psychological impact on students.
  • Perfect for highly interactive teaching.
  • Easy-to-hold handles for portability.
Get Info Now

HARDLINE Series Tactical Shields

Product From Patriot3 Inc.

Patriot3's HARDLINE Series Tactical Shields are designed to address an Operators need for robust protection to meet common threats (NIJ 3A). A shield that does not compromise mobility and is lightweight and easily handled.

Get Info Now

Ballistic IIIA Clipboard

Product From Daw Technologies Ballistic Products

Daw Tech's Ballistic IIIA Clipboard was designed for LEO use during traffic stops. During recent testing, the clipboard withstood four shots at point blank range from a .44 Mag. 

The ballistic clipboard measures 10 inches by 13 inches and is designed to fit in backpacks, notebooks and computer cases.

Get Info Now