XREP wireless 12-gauge electronic control device
From TASER INT'L
Product From TASER INT'L
TASER International Inc. introduces the XREP wireless 12-gauge Neuro Muscular Incapacitation (NMI) projectile. The XREP introduces miniaturized TASER technology, but groundbreaking flight stabilization and microprocessor-controlled intelligent electrode selection technologies in a package that weighs only half an ounce. This sophisticated weapon system launches from a 12-gauge shotgun platform.
Expand for more details on this Product
- Product From G-Squared Consulting LLC
Point Blank Solutions Inc. announced its agreement with G2 Consulting to integrate G2's ThorShield electroshock weapon protection systems line into Point Blank Body Armor and PACA body armor products. ThorShield works by providing a highly conductive specialized layer of fabric that ensures the electric current discharged from the weapon flows through the lining rather than the body. The protective material can be applied to officers' garments and equipment such as body armor, shirts, jackets, training suits, gloves, and hats. Important to ThorShield's design is that it can allow for greater flexibility at less weight, without compromising protection. The lining is breathable and provides the comfort essential to officers in the field.
- Product From CAMPCO
Features of the UZI Stun Riot Shield:
- 9 Volt power supply
- 6,000 Volt to 500,000 Volt Output
- 3mA Output Current
- 25 to 40 HZ Cycle
- Two 9 Volt battery supply
- Ploycarbonate plate material
- Available in Large at three feet tall and Small to protect part of the body or face
- Product From Stun-Cuff by Myers Enterprises Inc.
Myers Enterprises, lnc. manufacturers of the Stun-Cuff ECD wireless prisoner control device are in early stages of development for a Stun-Cuff monitoring device and should be available in the next 12-16 months. The device incorporates the Stun-Cuff feature along with GPS and/or alcohol monitoring and voice communications.
- Product From BLACKHAWK!
The Blackhawk TASER X2 Duty Holster features proven SERPA security, a versatile Mod-U-Lock belt clip that allows easy exchange among officers, and lightning-fast access—cross-draw or strong side to help prevent confusion with primary weapon. The release is operated with the trigger finger as part of a natural drawing motion. The Taser is rocked back to remove it instead of the traditional straight draw.
- Product From BLADE-TECH INDUSTRIES
Blade-Tech's Taser X2 Holster is simple, proven and reliable. The rugged X2 holster has the same dependable and easy to use retention mechanism as Blade-Tech's X26 holster. The X2 holster completely covers the trigger guard ensuring the utmost safety. Furthermore, the safety mechanism is automatically re-engaged when the X2 is re-holstered and the security hood actuated. The process is intuitive to those familiar with the Taser X26 holster and thus eliminates any additional learning curve. Blade-Tech's X2 holster has a higher heat temperature deflection than other materials used in most holsters today. This material has no memory loss in high heat temperature climates and is very stable through both temperature extremes. The finish is a textured, non-reflective, matte black, similar to the exterior of Blade-Tech's custom holster line. Furthermore, the holster has solid riveted construction ensuring utmost toughness and eliminates the possibilities of screws and post loosening.
- Product From Meggitt Training Systems
Meggitt Training Systems BlueFire Wireless Weapon Simulators use commercial wireless Bluetooth technology to communicate with the training system in the same manner as our System Controlled Weapons. For weapons with recoil, this is achieved with a rechargeable magazine of compressed gas. This is significant in that, while not tethered, Meggitt Training Systems BlueFire weapons still retain the full sensor feedback. These BlueFire weapon simulators can be used in conjunction with other System Controlled Weapon simulators without requiring any modification. Meggitt Training Systems has already released BlueFire versions of Chemical Spray, Taser, the Glock 17 pistol, and BlueFire configurations of the Sig P226, Beretta M9, Walther P99, M4 and SRS Rifle (M16 type) simulators.
- Product From Safariland, a part of The Safariland Group
Safariland announced today that it has released the Model 5122 EDW Open Top Holster with Belt Clip, an all-new compact duty holster design featuring open top access with trigger guard retention for the recently released Taser X2 electronic discharge weapon.
- Product From TASER INT'L
Introducing the most customer driven TASER device ever developed. Designed by law enforcement for law enforcement - The TASER X2 incorporates agency's most requested capabilities. A device that's feature rich, simple to use and similar in size to the TASER X26.
- Product From GLOBAL PATHOGEN SOLUTIONS INC.
- X-TRACTOR Tips
- Constructed of clear high-grade polycarbonate, the tip is designed to completely and securely acquire, remove and house contaminated stun-gun darts. Inside the tip is a four-fingered retractable device, a collet, made of extremely strong “Polyglow” and used to grasp the dart(s). Once the handle light is turned on, the collet will glow to assist in locating the X-TRACTOR Tip™ if the tool is set down or dropped in low-light conditions.
- Product From GLOBAL PATHOGEN SOLUTIONS INC.
The D.A.R.T. Pro Kit (Dart Acquiring and Retention Tool) - Affordable and effective Personal Protective Equipment (PPE) - Easy to use, for left- or right-handed Users - Built-in lighting for lwo-light conditions - Includes evidence labels and bags