- 7566 Morris Ct., Suite 300
- Allentown, PA 18106
- Phone: 610-973-2614
- Toll Free:
- Fax: 610-973-2601
- Website: http://www.lancer-systems.com
Want to know more about LANCER SYSTEMS Get Info Now
Company Profile | Request more information
Company Profile | Request More Information
Want to know more about LANCER SYSTEMS Get Info Now
Expand for more details on this Company
The Lancer L5 AWM 48-round magazine is based on the feed lip and body geometry of the L5 AWM. It is engineered using a 30-round magazine coupled to a special lower section, similar to the original L5C 48-round. The magazine is available as an assembled unit or as a kit that can be used on an existing L5AWM 30-round magazine. The 48-round is available in translucent smoke, opaque black and clear translucent.
Lancer's L5 AWM 10-round magazine is based on the feed lip and body geometry of the original L5 AWM. It features a low profile and can be disassembled for cleaning. The magazine has a sleek look and is available in translucent smoke, colored opaque and our new clear translucent polymer body. Fits M16/M4 and AR pattern rifles.
Lancer's new Carbon-Fiber extension tubes replace the cap of your existing shotgun to extend the capacity of the shotgun. The Lancer Carbon-Fiber Shotgun Shell Extension features a light-weight carbon-fiber tube with a bonded nut and end cap and a carbon-fiber barrel clamp. Made in 12-guage for the following: Beneli M1/M2, Remington 870/1100/1187, and Remington Versa Max. Lengths include plus two through plus nine.
Lancer's L15 Rifles are custom rifles based on all Lancer L15 receiver and Lightweight Carbon-Fiber Handguards. The L15 rifle will be available in four basic design options - Sporter, Competition, Super Competition and Sharp Shooter.
Lancer's L15 Forged Receiver features mission configurable magazine well extensions in three sizes - standard, tactical and competition. Each well extension is machined from billet aluminum for a precise fit. The receiver is machined from 7075-T6 custom forging with a broached magazine well. It features an enhanced ambidextrous bolt release, an oversized magazine release button and coating MIL-A-8625, type III, class two with optional colors OD green, red and blue available by special order.
Lancer Systems LP's Lightweight Carbon-Fiber Handguard (LCH) for AR pattern rifles weighs less than comparable aluminum handguard systems without sacrificing rigidity or impact strength.
The Lancer LCH can be applied to a variety of rifle configurations and be used in multiple applications. Available in carbine, mid-length, rifle length and extra long (15-inch), the handguard offers an advanced, heat-resistant carbon fiber tube; low profile; and multiple sight rail options. Supporting the carbon fiber tube is a precision machined receiver extension and an aluminum end cap designed to prevent impact damage.
Lancer Systems LP's Lancer L5Advanced Warfighter Magazine (L5AWM) for semi-automatic rifles that accept STANAG 4179 magazines is a hybrid magazine that combines the best features of polymer and steel magazine designs. Unique to the L5AWM is the one piece wrap-around steel feed lip assembly that is permanently attached to an impact resistant polymer body. The steel feed lip assembly is made from a single piece of precision formed steel that is hardened and PTFE coated for corrosion resistance. The hardened steel feed lip assembly won’t bend, break or deform due to rough handling or long term storage.
With three Magwell configurations to choose from, Lancer Systems' L15 lower can be rapidly customized for a specific mission, trip to the range or three-gun match. The tactical and competition Magwells have a large smooth funnel like internal surface to facilitate rapid magazine changes. The standard size Magwell emulates the size of a typical AR lower. The Magwells attach to the lower via a captured rail and locks into place with a standard front takedown pin. The use of the takedown pin allows the Magwells to be removed without the use of special tools. The Magwells are precision machined from aluminum billet to match the features in the lower, ensuring there is no rattle during operation. The lower also features an ambidextrous bolt release and oversized magazine release button. The L15 lower is available stripped or complete with various trigger and magazine well options.
The Lancer L5-10 is based on the proven L5 design; Impact resistant translucent polymer body, hardened steel feed lips and rubber coated bottom. Developed for areas with high capacity restrictions, hunting and general range use, the L5-5 and L5-10 provides a low, less threatening profile while maintaining the high reliability associated with the L5 Translucent Magazines. The L5-5 and L5-10 share the same body, but the L5-5 has a follower that limits the magazine's capacity to 5 rounds making it legal for hunting use in many states.
Designed to expedite pre- and post-operation inspection, provide additional safety in the field and on the range, and enhanced operational reliability, the translucent body of the L5 from Lancer Systems provides instantaneous round counts, as well as a visual inspection for foreign objects or equipment malfunctions. Incorporating a polymer construction, hardened steel feed lips molded into the magazine and a rubber-coated bottom, the L5 fits into existing weapons and pouches.