Night Vision gets smart: US Night Vision’s iPhone 4 Adapter held up to the light

Feb. 13, 2013

For years I have been trying to get good photos through my ITT PVS-14 night vision monocular. I have tried all kinds of contraptions, mounts you name it. Most of the ones that actually looked like they would work cost far more than I could afford. I know, night vision is not a cheap man’s game, but come on I only have so much money.

Years ago when I was a detective on an Agricultural Crimes Unit we tried everything available. We had an ITT 6010 that was great for photographs, but trying to get it in front of a camera was a nightmare. We ended up mounting it to the front of a small camcorder and were able to get useful video during surveillance operations. Getting photos off of the video was another issue given the technology available to us back then. From this experience I have been on the lookout for a way around this for a very long time.        

While looking for a lightweight helmet, to set up specifically for night vision testing and training, I found something more interesting on the US Night Vision web page. It was the iTelligent, an adapter that screws into the eye pieces of a PVS-14 night vision monocular allowing the mounting of an Apple iPhone 4 or 4S smart phone camera in line with a night vision device. This allows the user to take night vision photos or video with their iPhone.

I contacted US Night Vision and asked for a sample for testing. The first adapter I was provided with turned out to be obsolete before I could finish this article. The first unit was a single piece of black anodized aluminum with a channel to hold the iPhone and a round threaded ring that screwed into a night vision device. My iPhone slid into the channel smoothly and was held in place quite firmly. The ring threaded into my PVS-14 in place of the demist shield easily. This unit did not allow for rotational positioning of the iPhone behind the PVS-14 and was not a perfect fit for every iPhone that was placed into it. I was happy with the unit, but US Night Vision was not. They improved the design and provided me with the current generation model of the iTelligent iPhone 4, 4S Night Vision & Optics Adapter.

The new standalone version is a two-piece design with a ring that is adjustable for 360-degree rotational placement of the iPhone in relationship to the optic or night vision device being used. The two-piece design allows for variations in size of the iPhone so that any iPhone will fit properly in the mount. The new ring allows the user to place the iPhone in any desired rotational position. This means users can put the iPhone body and screen where they need it for whatever optic or mission they are engaged in. An example would be placing the unit on a spotting scope or PVS-7B. On a PVS-7B you can record with the iPhone on one viewer and look through the night vision device with the other viewer. This eliminates the need to use the iPhone screen to view your target, which could cause your position to be illuminated by the screen. The new version is a big improvement over the original from an operator’s perspective.

Using the PVS-14 with the iPhone attached via the mount was easy. Simply hold the body of the PVS-14 and view the screen on the iPhone and take photos or videos as usual. The photos are not perfect, but this has more to do with the quality of the camera on the iPhone and nothing to do with the mount. A number of camera Apps are available that may help with this. If I tried to go through all of them this article would go on and on and be out of date as I write it. The good folks at US Night Vision can provide you with some assistance on this issue as they tend to be on top of what does and does not work with their products.

I was asked by several cops, “So how does this help me?” and that’s a good question. When used with nigh vision you can record what you have seen. This can be very useful for search warrant preparation and execution of places in rural areas like Marijuana grows, chop shops or stash sites. I have used apps on my phone that overlay the GPS coordinates and altitude onto the photo of where the photo was taken; this eliminates the need for flash or light for photographs maintaining a covert investigation and by adding the location of where the photograph was taken adds to its evidentiary value.

Video evidence through high powered spotting scopes of various activities can be collected easily with equipment of minimal weight and size. Photographs and video can be sent from the field to others nearly instantly via the iPhone. Best of all, your team is using existing equipment that they are already familiar with to accomplish this. Training time is minimal while significantly increasing capability and efficiency. The usefulness of the iTelligent adapter is limited only by your imagination and optics available to you.

The current version is available as a standalone unit and as a kit. The standalone unit is what I have been testing; it will hold any iPhone 4 or 4S so long as the phone does not have a case on it. The lower section is adjustable to fit and hold your iPhone in proper position. The unit stows into itself to an overall size that is about half the size of your iPhone. Both the standalone and the kit are made of hard anodized aluminum. According to US Night Vision, the kit version includes a matte textured ULTEM composite bumper case that provides your phone with lightweight, sleek and stylish protection. It comes with an industrial grade protective Carbon Fiber graphic backer and natural view screen protector, both by 3M. This acts to dampen impacts and protect the device, in addition to adding a matte non-reflective finish for use at night.

If you use the kit you must use the included bumper case, as it attaches to the kit version of the adapter. The case slides into the adapter for use with an optic and out of the case for daily use. The benefit of the kit is the protective case and simplified use of the adapter. The downside is that the adapter for this version only works with phones that have a bumper case.

The standalone stow away adapter is included with ¼ x 20 threaded mounting points on each side of the adapter to allow other mounting options. Either version will work with a gantlet of optics including the AN/PVS-14, AN/PVS-7, AN-PVS-15, and FLIR Recon M24 Thermal Imager, as well as spotting scopes of various manufacturers. US Night Vision has other adapters that are sold separately, so if you’re not sure what to get contact them to see if they have a solution for you. They are also producing an iPad adapter that will allow you to connect various optics to the camera on your iPad.

Sponsored Recommendations

Whitepaper: A New Paradigm in Digital Investigations

July 28, 2023
Modernize your agency’s approach to get ahead of the digital evidence challenge

A New Paradigm in Digital Investigations

June 6, 2023
Modernize your agency’s approach to get ahead of the digital evidence challenge.

Listen to Real-Time Emergency 911 Calls in the Field

Feb. 8, 2023
Discover advanced technology that allows officers in the field to listen to emergency calls from their vehicles in real time and immediately identify the precise location of the...

2022 Transparency and Trust Report - Public Safety & Community Relationships

Nov. 16, 2022
Veritone releases its 2022 Law Enforcement Transparency and Trust Report delivering Five Key Findings of Community Sentiment on Policing

Voice your opinion!

To join the conversation, and become an exclusive member of Officer, create an account today!